WF02
Beschreibung
Druckluft ist eine sichere und zuverlässige Energiequelle, die in der Industrie weit verbreitet ist. Im Verhältnis zu seiner breiten Verwendung nehmen Probleme, die durch Flüssigkeitsansammlungenverursacht werden, rapide zu. Daher wird WF (Water Free) eingesetzt, um die Feuchtigkeit aus der Druckluft zu entfernen und damit die Zuverlässigkeit zu erhöhen.
Operating Principle
Compressed-air is supplied into ① the INLET port on the Water Free, then the air passes through ② the DIFFUSER. Compressed-air that passes through the DIFFUSER is usually a combination of air and moisture. The incoming compressed air is pushed into ③ the LIQUID SEPARATOR. The moisture falls through the LIQUID SEPARATOR, and the air is able to exhaust out without any moisture.
① Air Inlet
② Diffuser
③ Liquid Separator
④ Filter
⑤ Water-Free Unit Body
⑥ Auto-Drain
Bestellnummer

1. Basis-Modell
| Zeichen | Beschreibung |
| WF | Water free unit |
2. Druckluftanschluss
| Zeichen | Beschreibung |
| 02 | Air supply port, G2″ female |
3. Auto-Drain
| Zeichen | Beschreibung |
| A | Auto-Drain device |
4. Halterung
| Zeichen | Beschreibung |
| B | Halterung (mounting bracket) |
Angaben
General Specifications
| Max Flow Rate | 18,000 Nl/min |
| Depression | 0.2 bar |
| Operating Pressure | 3~10 bar |
| Water Drain Effect | 99 % |
| Oil Removal | 70 % |
| Drainage Method | Automatic |
| Air Supply Port | G2″ |
| Drain Outlet | Push-in fitting for outer diameter Ø6 mm air-hose |
| Size | Ø178 X 570 mm |
| Weight | 9.9 Kg |
Maße
Maße

| WF02-A | Maße |
| G | G2″ |
| H1 | 570 mm |
| H2 | 531 mm |
| H3 | 384 mm |
| H4 | 170 mm |
| D1 | 178 mm |
| D2 | 149 mm |
| W1 | 72 mm |
| W2 | 45 mm |
Bestellnummern
Water Free Unit & Ersatzteile
| Modell | Beschreibung |
| WF-02-AB | Water-free unit, G2″ port, Auto-drain, Mounting bracket |
| WF-02-A | Water-free unit, G2″ port, Auto-drain |
| WF-02 | Water-free unit, G2″ port |
| 13S021 | Auto Drain, 402-04 |




